Instruction Manual

WALL MOUNT INSTALLATION

NOTE: Do not mount the TC100 directly to plasterboard, paneling, brick, or

concrete block. Rather, using appropriate fasteners, secure a board

to the wall and then mount the TC100 to the board.

1. At a height convenient for all members of the work force and within 5 ft. of a power out-

let, use the mounting template (enclosed) to mark the points where the mounting screws

for the TimeMaster are to be installed.

2. Leaving 1/4 in. of screw shank exposed, mount enclosed screws into place.

3. Attach metal bracket to back center of clock (see photo).

4. Hang the TimeMaster from the mounting screws and secure the bracket to the wall.

EnglishVersion 12/6/05 11:06 AM Page 12