Instructions / Assembly

31
ASSEMBLY
3
3. Temporarily tighten the cable so
that the link wire is at the position in
the illustration.
1
2
1
2
5. Secure one of the shoes at a time.
The adjustment of the shoe clearance is
not necessary at this time.
Shoe fixing nut tightening torque:
7.84 - 8.82 Nm (70 - 78 in. lbs.)
1 mm
10 mm wrench
5 mm Allen key
Cable Anchor Bolt
To u ch i n g
End cap
Cut off any unnecessary
cable, attach an end cap,
and hook it onto the
notched part of the nut
which secures the shoe.
Cable Casing Holder
Link Wire