User's Manual

off. Unplug the device and remove the charger.
B.4.2 STEP 2: Turn on Receiver and Wait for GPS Fix
1. The GPS Status LED will initially show a steady green light to show
that the position has not been fixed yet.
2. After the position is fixed, the GPS Status LED will twinkle green.
Now you are ready to connect to your Bluetooth-enabled mobile
device and use your GPS application.
B.4.3 STEP 3: Connect to Bluetooth-Enabled Devices
1. From your Bluetooth-enabled mobile device, perform a Bluetooth
device discovery. Refer to the user documentation for your
Bluetooth-enabled device for instructions.
2. After connection is creating between Bluetooth-enabled device and
BlueGPS, the LED will twinkle blue light.
B.4.4 STEP 4: Use GPS Application
1. Load your GPS mapping or routing software, along with the
corresponding maps of the areas that you are occupying and plan to
travel to.
2. Start the application. Make sure the application is set for the COM port
that your Bluetooth-enabled mobile device will use for serial
communication. Now you should be ready to use your GPS application
as directed by the user documentation that came with the software.
More configurations may be necessary.
3. Refer to the following software application user manual to set up the
parameters of the device via Bluetooth radio.
6