Specification

ManualsBrandsROYALTON ManualsForced Air Furnaces88,000 BTU 95% AFUE 2-Stage Downflow Forced Air Natural Gas Furnace with ECM Blower Motor

95G2E

PRODUCT SPECIFICATIONS

95% TWO-STAGE

CONSTANT TORQUE

GAS FURNACES

FORM NO. 95G2E-100 (04/2018)

Page 1

CONTROLS

• Two stage gas valve

• Integrated ignition and fan control

• Control board retains last ten (10) fault codes with push button

memory recall and 7 segment LED display, regardless of power

interruption

• Hot surface ignition system uses silicon nitride ignitor

• Control features 120 volt electronic air cleaner and humidifier

terminals

• Control circuit is fuse protected

• Color coded control wiring

• Compatible with single or two stage thermostats for heating. Two

stage thermostat is recommended when installed with two stage

cooling unit.

VENTING

• 2-speed induced draft motor with stainless steel shaft, steel ball

bearings, and fan cooled for

long life

• Vent materials for Canadian applications must comply with ULC

S636

• Certified for direct vent and indirect vent (1 and 2 pipe)

applications

INSTALLATION FEATURES

• Left or right gas and electric entry

• Zero step horizontal conversion

• Removable floor base (upflow/horizontal units) for bottom return

air

• All models comply with California's South Coast Air Quality

Management district Low NOx requirements

WARRANTY

10 year limited parts warranty / lifetime heat exchanger warranty avail-

able. See limited warranty document for details.

HEAT EXCHANGER DESIGN

• Aluminized steel primary heat exchanger with crimped non-welded

construction

• AL29-4C Stainless steel secondary heat exchanger

• Non-welded crimped S-curve primary heat exchanger design for

maximum durability

BURNERS

• Aluminized steel in shot burners for smooth ignition

• Isolated burner enclosure for quiet operation

CABINET CONSTRUCTION

• Compact 33" height

• Standardized widths for easy coil fit

• Unitized construction for cabinet integrity

• Heat exchanger compartment is insulated to increase efficiency and

reduce sound levels

• Baked on prepainted steel cabinet finish

CONSTANT TORQUE ECM

• Efficient blower motor

• Easily removable slide-out blower design

• Dynamically balanced blower wheel with resilient motor mounts for

smooth and quiet operation

• Upflow / Horizontal

• Downflow

CONFIGURATIONS

Summary of content (7 pages)

PAGE 1
95G2E 95% TWO-STAGE CONSTANT TORQUE GAS FURNACES PRODUCT SPECIFICATIONS FORM NO.
PAGE 2
95% TWO STAGE CONSTANT TORQUE 95G2E MODEL NUMBER GUIDE 95 G 2 UH 110 C E 16 -01 AFUE 95 = 95% EFFICENCY MAJOR REVISION REVISION CODE NOM. CFM X 00 12 = 3 TON ADD ON COOLING 16 = 4 TON ADD ON COOLING 20 = 5 TON A DD ON COOLING GAS STAGES 2 = TWO STAGE CONFIGURATION UH = UPFLOW/HORIZONTAL DF = DOWNFLOW BLOWER DRIVE E = CONSTANT TORQUE ECM BTUH INPUT HEATING INPUT X 1000 CABINET WIDTH B = 17.5” WIDTH C = 21.0” WIDTH D = 24.
PAGE 3
95% TWO STAGE CONSTANT TORQUE 95G2E BLOWER PERFORMANCE DATA Model 95G2UH045BE12 UPFLOW / HORIZONTAL 95G2UH070BE12 95G2UH090CE16 95G2UH110CE20 95G2UH135DE20 Motor Size (hp) 1/2 1/2 3/4 1 1 Temp Rise (F°) Blower Size 10 x 8 10 x 8 10 x 10 11 - 1/2 x 10 11 - 1/2 x 10 High Fire 35 - 65 50 - 80 45 - 75 45 - 75 55 - 85 Low Fire 20 - 50 25 - 55 30 - 60 30 - 60 40 - 70 Blower Speed CFM @ external static pressure - “w.c. .20 .30 .40 .50 .60 .70 .
PAGE 4
95% TWO STAGE CONSTANT TORQUE 95G2E BLOWER PERFORMANCE DATA (CONTINUED) Model 95G2DF045BE12 1/2 3/4 Temp Rise (F°) Blower Size 10 x 8 11 - 1/2 x 10 High Fire 35 - 65 35 - 65 Low Fire 20 - 50 25 - 55 DOWNFLOW 95G2DF070BE16 Motor Size (hp) 95G2DF090CE16 95G2DF110CE20 3/4 1 10 x 10 11 x 11 40 - 70 45 - 75 30 - 60 35 - 65 Blower Speed CFM @ external static pressure - “w.c. .20 .30 .40 .50 .60 .70 .
PAGE 5
95% TWO STAGE CONSTANT TORQUE 95G2E DIMENSIONS (IN.
PAGE 6
95% TWO STAGE CONSTANT TORQUE PRODUCT ENTERPRISE PROCESS 1.6.5. PRODUCT ACCESSORIES - PRODUCT MANAGEMENT ALLIED CAT NUMBER ACCESSORY RETURN AIR BASE Return Air Base 17.5 Inch 68W62 Return Air Base 21.0 Inch 68W63 Return Air Base 24.
PAGE 7
95% TWO STAGE CONSTANT TORQUE 95G2E ACCESSORY LIST CATALOG NUMBER DESCRIPTION EXTERNAL FILTER RACK KITS 1.841018 1 pack (16 x 25) 1.841039 10 pack (16 x 25) RETURN AIR BASE 68W62 17.5" B Width 68W63 21.0" C Width 68W64 24.5" D Width DOWNFLOW COMBUSTIBLE FLOORING BASE 11M60 17.5" B Width 11M61 21.