Royer Manual
Table Of Contents
- Introduction
- Active Ribbon Technology
- Description
- Ribbons in the Digital World
- User’s Guide
- Operation
- Using the RSM-24 Shock Mount Accessory
- Amplification Considerations
- The Sweet Spot
- Proximity Effect and Working Distance
- Microphone Technique
- Stereophonic Microphone Technique
- Care and Maintenance
- Features and Specifications
- Polar Pattern
- Frequency Response
- Warranty
Warranty
PLEASE RETAIN YOUR ORIGINAL BILL OF SALE AS YOU WILL NEED TO PRESENT IT
SHOULD YOU REQUIRE SERVICE UNDER THIS WARRANTY.
TO VALIDATE THIS WARRANTY, THE REGISTRATION CARD AND A PHOTOCOPY OF THE
SALES RECEIPT FROM AN AUTHORIZED ROYER DEALER MUST BE ON FILE WITH ROYER
LABS.
Royer Labs warrants all Royer products sold by Royer Labs’ authorized dealers and/or
distributors!worldwide with the following terms and conditions.
WARRANTY PERIOD
•
10-year full warranty coverage on materials, workmanship, and finishes to the original owner.
•
Ribbon Element – First re-ribbon free to the original owner within one year of purchase.
•
Extended Ribbon Element policy – First re-ribbon free within five years of purchase if the
microphone is registered by the original owner within one year of purchase. Microphones must be
registered within one year of purchase for extended ribbon element warranty coverage.
SCOPE OF WARRANTY:
From the date of original purchase and for the respective periods specified above, Royer Labs agrees to
repair!all Royer Labs products which are defective in material and workmanship.
EXCLUSIONS:
This warranty does not apply in the event of the following:
1. Defects or damage caused by accident, fire, flood, lightning or other acts of nature.
2. Defects or damage caused by abuse, misuse, negligence or failure to observe the instructions
contained in
3. the owner’s manual furnished at the time of original purchase.
4. Products that have been altered or repaired by anyone other than a Royer Labs authorized service
facility.
5. This warranty applies to the original owner only and is not transferable.
6. Normal wear and tear of the finish.
OBTAINING WARRANTY SERVICE:
Warranty service is provided by Royer Labs or Royer Labs authorized repair facilities. All products
returned for warranty or!repair service must be accompanied by a Royer Labs Repair Authorization Form.
These forms are available on our website at:
US Repair Authorization Form – contact Royer for RA number
Non-US Repair Authorization Form – contact Royer for RA number
The product(s) must be returned in original packaging, or packaged as shown in the Repair & Service
section of our website. Royer Labs is not responsible for warranty or service-related shipping charges.
ROYER Labs
2711 Empire Ave.
Burbank, California 91504
Telephone 818.847.0121
www.royerlabs.com
19