User's Manual

successful, and the function of the product can be set by operating the
remote control again.
2.3 To test whether the pairing is successful. Please operate the charcoal
bed light or downlight button , if the product has a beep, it
means the match is successful, if there is no response, it means the
match fails. Please repeat all the steps above (the product must be
powered on.) Only our electric fireplace products are supported.
3. Function description
Switch: Operate the switch button to control the product to be turned on
and off.
Recovery function: operate the recovery button, the product can be
restored to the default open state.
Flame color switching function: operate the remote control“ ”Can
switch up the flame color
Operate the remote control " " to switch down the flame color
Flame speed function:
operate the remote control " " to slow down the flame speed
Operate the remote control " " to speed up the flame
Flame sound function:
operate the remote control " " to increase the flame sound