Owner's Manual

7
BUILT-IN INSTALLATION
Fully Recessed Installation (Single Sided)
1. This installation is optimized for a
2x6 framed wall. Prepare the framed
opening according to the framing
dimensions chart (pg 4).
*Provide appropriate dedicated circuit for
hardwire install at the top right of framed
opening.
2. Install L Metal mounting brackets
to the top and bottom of the
fireplace with supplied screws.
3. Hardwire fireplace (see page 6)
4. Install the fireplace in the framed
opening with a minimum 1 1⁄4"
drywall screws to secure the unit.
5. Mask the exposed fireplace during
the drywall process. Install drywall
to the drywall stops on the
perimeter of the fireplace.
For more information on the
drywall stops see the product
guide on page 4.
5. Remove glass (see page 10) and
install media. See page 9 for log
layout.