Owner's Manual

8
BUILT-IN INSTALLATION
Partial Recessed Installation
1. This installation is optimized for a
2x4 framed wall. Prepare the framed
opening according to the framing
dimensions chart on page 4.
*Provide appropriate dedicated circuit
for hardwire install at the top right of
framed opening.
5. Mask the exposed fireplace during
the drywall process. Install drywall
to the perimeter of the fire box.
The unit can be covered with a
custom facade.
6. Remove glass (see page 10) and
install media. See page 9 for log
layout.
2. Install L Metal Nailing Flanges to
the fireplace.
3. Hardwire fireplace (see page 6)
4. Install the fireplace in the framed
opening with a minimum 1 1⁄4"
drywall screws to secure the unit.