RPM81492 RPM ARRMA 4x4 Front A Arm Instructions

#81492 ARRMA Senton 4x4, Big Rock 4x4 & Granite 4x4 Front A-arms
Installation Notes: Swapping your stock A-arms with your new RPM versions is as
simple as removing and replacing the stock A-arms, with only one easy difference.
RPM A-arms do not have a hole for an offset screw to retain
the outer hinge pins. Instead, we use an in-line screw.
Slip the hinge pin in place, then follow the hinge pin
with the included #6 Pan Head Screw. Caution: Do
not overtighten the screw.

Note: The outer hinge pin will only go in
from one side of the A-arm. Do not
try to force it in from the wrong
side. The correct side is
from the conical side of the
arm.
Install Hinge Pin
from this side
#6 Pan Head
Screw
Front A-arm