Use Instructions

1.4 - Disclaimer
Operate and maintain this instrument according to this manual and other instructions from the manufacturer.
Failures and defects as result of unspecified use will void the product warranty. Changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
The instrument is not equipped with backup- or control systems to prevent production of incorrect reagent
due to conditions such as:
▪ Uncalibrated measuring circuitry
▪ Instrument malfunction
▪ Poor quality of concentrated reagent
▪ Poor quality of feed water
The RPI (including WPU) is designed to stay connected to the main power supply and water
supply at all times.
The quality of RPI’s production has to be checked daily for use on the connected analyzers
according local quality specifications.
Do not disconnect the RPI(s) prior to completion of the shut-down cycle.
The manufacturer disclaims any liability for any direct, indirect, incidental, special or
consequential damages of any kind, arising from the use of incorrect prepared reagent.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Introduction
10
MRN-184-EN Version 6 (05-01-2022)