Use Instructions
Table Of Contents
- Contents
- Document history overview
- Introduction
- Intended use RPI
- Installation procedures and requirements
- Principles of operation
- Performance characteristics and specifications
- Standard operation procedures
- Calibration procedures
- User interface and software menu
- Operational precautions, limitations and hazards
- Troubleshooting
- Maintenance
- Error list
- System temporarily out of use
- Decommissioning and disposal
- Glossary of Terms
- Index
1. Open the door.
2. Remove empty bottle from the instrument and replace with a new one. Always use a bottle that has
been acclimatized to room temperature for at least 24 hours.
3. Place the bottle with the NFC-tag facing the NFC-reader to enable the RPI to read the NFC properly.
4. Close the door.
The NFC is automatically read to import batch information. If the NFC tag is not read correctly it can be
manually entered.
Standard operation procedures
36
MRN-184-EN Version 6 (05-01-2022)