Use Instructions
Table Of Contents
- Contents
- Document history overview
- Introduction
- Intended use RPI
- Installation procedures and requirements
- Principles of operation
- Performance characteristics and specifications
- Standard operation procedures
- Calibration procedures
- User interface and software menu
- Operational precautions, limitations and hazards
- Troubleshooting
- Maintenance
- Error list
- System temporarily out of use
- Decommissioning and disposal
- Glossary of Terms
- Index
6.5 - Checks during operation
Pay attention for the status of the cubitainers on the main screen. It is advisable to replace the empty
cubitainer prior to the active one reaching it’s 50% level.
Check the display of the WPU for possible signals of the condition of the filters (see display of the AFS,
visible from the outside)
If optional external warning light is installed, the status of the instrument is indicated as:
Green: instrument in operation mode
Orange: warning, instrument needs attention
Red: error, instrument needs attention immediately
The quality of RPI’s production has to be checked daily for use on the connected analyzers
according local quality specifications.
Standard operation procedures
MRN-184-EN Version 6 (05-01-2022)
37