Use Instructions
Table Of Contents
- Contents
- Document history overview
- Introduction
- Intended use RPI
- Installation procedures and requirements
- Principles of operation
- Performance characteristics and specifications
- Standard operation procedures
- Calibration procedures
- User interface and software menu
- Operational precautions, limitations and hazards
- Troubleshooting
- Maintenance
- Error list
- System temporarily out of use
- Decommissioning and disposal
- Glossary of Terms
- Index
8.7.1 - Manual Control cycle
his option can be used if an additional control cycle has to be performed. A control cycle will take maximum
20 minutes. For this step the door has to be closed.
1. Select ‘Log in’
2. Enter credentials
3. Select tab 'Manual’
4. Select "Start Control cycle", initiating the control cycle.
The instrument will start the control cycle once the current process is finalized. Once the cycle is done,
production is continued automatically.
5. Log out or otherwise log-out will occur automatically after 5 minutes of inactivity.
8.7.2 - Replace cubitainer function and adding users
A new cubitainer has to be installed after a reagent warning or error message. After selecting Replace
cubitainer the following message appears:
User interface and software menu
52
MRN-184-EN Version 6 (05-01-2022)