Use Instructions
Table Of Contents
- Contents
- Document history overview
- Introduction
- Intended use RPI
- Installation procedures and requirements
- Principles of operation
- Performance characteristics and specifications
- Standard operation procedures
- Calibration procedures
- User interface and software menu
- Operational precautions, limitations and hazards
- Troubleshooting
- Maintenance
- Error list
- System temporarily out of use
- Decommissioning and disposal
- Glossary of Terms
- Index
For maintenance of the WPU: See AFS24 User manual (Merck). Remove top and right side panel first.
11.7 - Cleaning
The concentrate and reagent tubing are automatically rinsed before each control cycle. As needed a manual
rinse cycle can be performed by the Field Service Engineer.
Annually, Service will perform additional internal cleaning during the PM visit.
11.7.1 - Cleaning of the drawers and casing
Remove spilled liquid inside the drawers and drip tray immediately. Lift the drip tray sensor before pulling
out the drip tray.
Maintenance
86
MRN-184-EN Version 6 (05-01-2022)