Video Gaming Accessories User Manual

ManualsBrandsRSA Security ManualsVideo Gaming AccessoriesLRS2

RSA SecurID Ready Implementation Guide

SecurID Ready Implementation Guide

Last Modified 12/20/99

1. Partner Information

Partner Name Lantronix

Web Site

www.lantronix.com

Product Name LRS1, LRS2, LRS16, LRS32F

Version & Platform

Product Description Lantronix's LRS line of Remote Access Servers provide

secure access for Dial-in, Dial-out, LAN-to-LAN,

Console Server and ISP connections. An ideal choice

for secure connectivity, all LRS models support PPP

(PAP/CHAP), SLIP/CSLIP, SecurID, Radius, Kerberos,

Unix, NetWare and local users database for

authentication on both inbound and outbound

connections. All LRS products support dial-back,

Network Address Translation (NAT), routing of TCP/IP,

IPX, and AppleTalk protocols is supported using RIP

and static routes.

Product Category Remote access server

Summary of content (7 pages)

PAGE 1
RSA SecurID Ready Implementation Guide SecurID Ready Implementation Guide Last Modified 12/20/99 1. Partner Information Partner Name Web Site Product Name Version & Platform Product Description Product Category Lantronix www.lantronix.com LRS1, LRS2, LRS16, LRS32F Lantronix's LRS line of Remote Access Servers provide secure access for Dial-in, Dial-out, LAN-to-LAN, Console Server and ISP connections.
PAGE 2
RSA SecurID Ready Implementation Guide 2. Contact Information Name E-mail Phone Web Pre-Sales Sales sales@lantronix.com 1-800-422-7055 www.lantronix.com Post-Sales Technical Support support@lantronix.com 1-800-422-7044 www.lantronix.com 3.
PAGE 3
RSA SecurID Ready Implementation Guide 4. Product Specifications ROUTING PROTOCOLS TCP/IP (RIP and Static Routing) IPX (RIP/SAP and Static Route) SERIAL INTERFACES LRS1 - 1 RS232 DB25 (DTE) male connector 115 Kbps LRS2 - 2 RS232 DB25 (DTE) male connectors & 1 RS423 (RS232C compatible) RJ45 interface 115Kbps LRS16 - 16 RJ45 (RS232C / RS423) serial ports support up to 115Kbps LRS32F - 32 RJ45 (RS232C / RS423) serial ports support up to 230Kbps All supporting full modem control, V.
PAGE 4
RSA SecurID Ready Implementation Guide 5. Product’s ACE/Agent configuration The LRS supports the ACE/Server security system manufactured by RSA Security Inc. ACE/Server is a system of client-server software and accompanying token cards. Note: Refer to your RSA Security documentation for ACE/Server installation instructions. The SecurID card generates single-use, unpredictable numerical codes. These "tokencodes," together with the user's PIN, form the basis of the SecurID authentication.
PAGE 5
RSA SecurID Ready Implementation Guide Set/Define Authentication SecurID Specifies that a Security Dynamics ACE/SecurID server will be used for authentication. Restrictions You must be the privileged user to use this command. Parameters Primary Specifies the first database or server to be checked. A specific address may be set with the address parameter, or the None parameter may be used to indicate that the database or file will not be used.
PAGE 6
RSA SecurID Ready Implementation Guide Precedence Set the precedence in which this database or server is checked. The precedence number must be specified using the prec_num parameter. prec_num A precedence number between 1 and 6. Encryption SecurID (SID) or DES encryption will be used for authentication. SID Enables use of SecurID encryption. DES Enables use of DES encryption. Maxtries Specifies the maximum number of times the LRS will attempt to contact the SecurID server.
PAGE 7
RSA SecurID Ready Implementation Guide 6. Certification Checklist Indicate here the tests that were run to ensure the product is SecurID Ready:: Test Pass st X 1 time auth.