Operator's Manual
Table Of Contents
Page 5
Version 1.4
Copyright © 2019 RSAE Labs
08-Apr -2019
1.2. Battery Charging
Before installation, the battery must be separated from the main housing and charged using an RSAE
Labs provided charger as shown in Figure 3. It takes approximately 2 hours to charge a completely
depleted battery. The charger has a trickle charge mode that activates after charging is complete. It is
advised to discontinue charging the battery within 4 hours of entering the trickle charge mode. Please
refer to the Battery Charging manual for additional information.
Battery charging is discussed in detail in Section 3.2.
Figure 3 - Battery Pack Separated from Main Housing
Figure 4 - GS-6C Battery with Charger Adapter