Operator's Manual

Table Of Contents

Page 6

Version 1.4

08-Apr -2019

1.3. Installation

The GS-6C installs on the doors at the rear of the container as shown below. The device has high

force magnets that hold it onto the cross beam as the doors are closed. A hookplate joins the radome

and the main housing.

Once the doors are closed, the radome is exposed on the outside of the container while the electronics

and batteries are hidden behind the door within the container. The seals of the door slide across the

hookplate as the doors are closed maintaining the seal integrity.

Figure 5 - GS-6C with Both Container Doors Opened

Figure 6 - GS-6C With Left Container Door Closed

Figure 7 - GS-6C Mounted on Container with Doors Closed