Operator's Manual

Page 9
Version 1.4
Copyright © 2019 RSAE Labs
08-Apr -2019
1.7. Required Tools and Accessories
The GS-6C has no user serviceable components other than installation and removal of the battery
pack. The battery pack must be removed to be charged. The battery pack is held by two 5/32” hex
head captive screws. In order to remove the battery pack, a corresponding 5/32” hex driver is required.
Battery pack removal and charging are discussed in detail in Section 3.2.
1.8. Certifications and Compliance
The GS-6C has been tested to meet the performance specifications defined in Section 8. Specifically,
the GS-6C meets applicable Federal Communications Commission (FCC) and European (CE)
standards. The GS-6C has been tested to meet applicable safety requirements for worldwide
operation.
See section 9 for more information.
1.9. Warranty
The GS-6C is warranted to be free from defects in materials or workmanship for a period of 12 months
from date of delivery.
This warranty does not apply to damage caused by misuse, abnormal use, neglect, impact, exposure to
harmful liquids, improper handling or extreme environmental conditions outside the design tolerances
specified in section 8.
There are no user serviceable parts inside the GS-6C main housing, radome, or battery pack. This
warranty does not apply to GS-6C devices which have been opened by any user for any purpose. This
warranty does not apply to any device which has been repaired, altered or modified in any way by any
third party.
THE WARRANTY STATED ABOVE IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, ANY WARRANTIES AS TO QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OR
MERCHANTABILITY. RSAE LABS, INC. (MANUFACTURER) MAKES NO WARRANTY THAT THE PRODUCTS WILL
MEET ANY SPECIFICATIONS NOT MADE KNOWN TO MANUFACTURER. MANUFACTURER MAKES NO WARRANTY
THAT ANY PRODUCTS WILL RECEIVE THE APPROVAL OF OR BE CERTIFIED BY ANY DOMESTIC OR FOREIGN
GOVERNMENT AGENCY OR ANY OTHER PERSON OR CERTIFYING ENTITY, AND MANUFACTURER ASSUMES NO
RESPONSIBILITY FOR OBTAINING SUCH APPROVALS OR CERTIFICATIONS EXCEPT AS SPECIFIED IN SECTION 8.
IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL,
OR PUNITIVE DAMAGES OF ANY KIND OR NATURE ARISING FROM THE SALE, DELIVERY, RESALE, REPAIR,
REPLACEMENT, OR USE OF ANY PRODUCTS OR THE FURNISHING OF ANY SERVICE OR PART THEREOF, WHETHER
SUCH LIABILITY IS BASED IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, EVEN IF SUCH
PARTY HAD BEEN WARNED OF THE POSSIBILITY OF ANY SUCH DAMAGES.