Installation Instructions

WARNING : Do not cover the Fresnel lens !
Mounting
>
Use proper tools and hardware.
>
Mount indoors in a temperature-controlled environment.
>
Mount camera 2.1 to 2.3 (6.9 to 7.5 ft.) from the floor.
>
Mount the detector on an outside wall, aimed at the area
to be protected.
>
Do not aim detector at windows, especially those that
let in direct sunlight, or at heat sources such as lamps,
fireplaces, radiators, and heating vents.
>
Do not aim detector at moving objects such as curtains,
fans, or animals in cages.
1
Separate base from detector.
2
Hold detector base against
mounting surface and mark the
two appropriate mounting holes.
3
Drill pilot holes and install anchors
where needed.
4
Mount detector base to surface
using appropriate screws
5
Install battery into detector,
observing correct polarity.
6
Place unit on the mounting surface so mounting holes
line up with pilot holes/anchors and secure the device
with the appropriate screws.
7
Attach detector to base and secure with screw.
Flat Wall Mounting
Corner Mounting Holes
PIR ITR601
INSTALLATION DATA SHEET
www.videofied.com