User's Manual

Use only the flashlights or only the output
CONFIGURATION
DEVICES
AREAS AND DEVICES
OK or YES
OK or YES
OK or YES
Lvl. 4
Device list
To select the siren
ADD A DEVICE
DEVICE
CONFIGURATION
OK or YES
OK or YES
ALARM
FLASH + SIREN
Press OK or YES and use the arrows to
select FLASH + SIREN, FLASH or SIREN
Those functions are only available for panel
firmware versions 04.03.XX.XXX and later
In order to check the firmware version, enter
the following code in the standby menu when
the panel is DISARMED : 000000+YES
Enable delay beeps
CONFIGURATION
DEVICES
AREAS AND DEVICES
OK or YES
OK or YES
Lvl. 4
OUT SIREN DELAY
DISABLED/ENABLED
By default, the output and the flashlights are enabled
when the OSX is active. You can enable one or the other.
By default, delay beeps are disabled on the OSX outdoor
siren. You can enable those delay beeps.
www.videofied.com
PRODUCT INSTALL SHEET
3
OSX Outdoor Siren