User Manual
22
3. W PANEL FEATURES GUIDE
INSTALLATION MANUAL
W & WIP Alarm panel
When the user disarms the system, the keypad indicates the last event.
In case of the user needs to read the full log file, use the keypad to go in EVENT LOG,
press
OK
or
YES
on SELECT LAST EVENTS and use arrow to list the events.
3.6 Read the event log
Press
OK
or
YES
for more information about an event
EVENT
LOG
SELECT LAST
EVENTS
OK or YES
15/10/13 11:29
MODIFIED PARAMET
OK or YES
15/10/13 11:10
SYSTEM DISARMED
3.8 Golden rules
Area 1 device are delayed by default (Area mode
parameter set as Auto). When you register a keypad or
a badge reader into an area set as Auto, that area will
automatically be delayed.
Never position a panel next to a high voltage electrical
cabinet. The interference will affect radio and 2G3G
performance.
Press
CLR
to erase a typing mistake.
Never register the same device twice (delete from the
system first).
The panel can register of up to 25 devices of all types,
including the keypad and the keyfobs.
Follow the Motionviewer installation instructions.
Consider the infrared field of detection when installing
the Motionviewer cameras, in order to protect goods or
an entry point instead of a zone.
1.
2.
3.
4.
5.
6.
Do not fix the keypad at the beginning of the installation
as it will need to be portable during programming.
Always clean the lens of the cameras aer the
installation. Use a clean, dry cloth, taking care not to
exert pressure on the lens.
Internal components are fragile, be careful opening or
closing the panel.
LCD screen goes dark aer 30 seconds of inactivity,
press an arrow or numeric key to light it up.
Infrared detectors should never be installed in stairs or
close to stairs (false alarm risks).
A colon display [:] means that the parameter can be
changed. Press
OK / YES
to display the colon
7.
8.
9.
10.
11.
12.
3.7 Automatic arming/disarming
Scheduling: This feature arms or disarms the system automatically at a defined hour and weekday.
The scheduling feature description is available in the EN- PANEL - SCHEDULING - NOTE application note (available on
videofied.helpserve.com).
Autoarming Delay: Defines an automatic rearming after every system disarming. Once the delay has expired, the panels
arms automatically. Enter 0 to disable the feature.