Installation Guide

Riverstone Care & Assembly
Manual
Care of the shade cloth that you just purchased is designed to be simple. With a
damp cloth wipe down the cloth to remove any dust or dirt that could build up
over time. Check the grommets to ensure a long life of the product. It is
common based on design of the commercial material that the threading could
slide and cause the appearance of gaps. This is easily corrected by pulling the
gap back into place.
Assembly Process – unwrap shade cloth. Depending on the size will depend
on the # of grommets. To affix to the solid structure you have a choice of using
bungee balls, zip ties, or flat rope, all sold separately.
Replacement Parts – There are no replacement parts on the shade cloth. This
is a single unit construction.

Summary of content (1 pages)