User guide

Aries Reference Manual Section 2 – Viewing and Analysing Data
Radio Systems Information Ltd. Page 26
2.5 Using Graphs
Aries provides powerful graphing functionality that allows multiple graphs to be created and updated in
real-time as new data arrives at the server. Either click on ‘New Graph’ or click anywhere on an existing
graph to display the configuration form as shown below:
Figure 25: Graph Configuration
The ‘Graph Update Rate’ selection allows the graph to be updated automatically as new data is received in
real-time from the probes every 10 seconds, 60 seconds or 5 minutes or not at all.
Two types of graphs may be created, ‘Values Type’ and ‘Summary Type’ as explained in the following
sections.
2.5.1 Values Type Graphs
The following parameters may be chosen for the X Axis and Y Axis:
X Axis Y Axis
Time RSSI
C1
BN RSSI
BN C2
Call Setup Time
A separate graph line is created for each probe. The following are examples of values type graphs:
Figure 26: Example values type graph of RSSI against time
Figure 27: Example values type graph of Call Setup Time against time