User guide

Aries Reference Manual Section 2 – Viewing and Analysing Data
Radio Systems Information Ltd. Page 31
- Square km
this takes the output from the square km analysis and
creates a warning if there are too many failed squares
- Graph
this takes the output from the graph settings and
determines if any value exceeds or falls below the
threshold. If a summary graph with min/avg/max values is
used then it is the average value that is compared against
the threshold. For a summary graph with all events then
every event is compared against the threshold.
- Summary: Base Site, Areas, Probes Mobile, Probes Static
If any if the items in the summary analysis fails then a
warning is produced
- Neighbours
If there are any entries in the specified neighbour analysis
list then a warning is produced.
Note that all warnings should be used with a date range
setting that includes the most recent data, e.g. last hour
with a check period of 10 minutes.
To perform a manual check to test the warning then click ‘Check Now’ in the main window.
To delete a warning click on the symbol in the main window.
Once a warning has been issued and the SMS and/or email sent then a copy of the warning will appear in
the ‘Issued’ page.
To check the email and SMS numbers, click the ‘Test’ button and a test message will be sent immediately.
A typical warning sent by SMS or email would look similar to the following example:
-----------------------------------------------------------------------------------------------
ID: 257
Date: 13/02/2010 18:40:01
Profile: probe_warning
Username: jsmith
Message: Probes Mobile - No Service
The following Probes Mobile has failed the summary analysis:
test_probe7
--No Service Events count: more then 1
-----------------------------------------------------------------------------------------------