User guide

Aries Reference Manual Section 3 – Admin Functions
Radio Systems Information Ltd. Page 62
4.5 Configuring Layers
The Aries map provides the ability to group Areas into Layers which can then be independently displayed
or hidden on the map. This is particularly useful for displaying large numbers of individual Areas, e.g.
representing predicted base site coverage areas, where it is useful to be able to display or hide all of them
at the same time.
Layers are created and managed from the Aries web page as shown below:
Figure 69: Configuring Layers
Layers are controlled on the map using the pop-out form shown below:
Figure 70: Displaying Layers on the map
Each layer may be displayed or hidden using the tick-box next to the Layer name.