Instruction Manual

11
NOTE:
• If the wireless connection fails again, check if
there is conict or strong interference
(for example, interference from an electronic
device) around your location. Remove these
conflicts or strong interferences and repeat
the above procedures.
• The subwoofer should be within 6m (18 feet)
of the soundbar in an open area.
• If a TV or an external device is connected, the
main unit AUX model and the subwoofer will
switch on automatically when the TV or the
external device is switched on.
• If the main unit is not connected with the
subwoofer and it is in On mode, the POWER
Indicator will flash. Follow step 1 ~ 4 above
to pair the subwoofer to the main unit.
8. Basic Operation
8.1 Standby/ON
When you rst connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the
button on the unit or on the
remote control to switch the unit ON.
• Press the
button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
- If a TV or an external device is connected, the
unit will switch on automatically when the
TV or the external device is switched on.
8.2 Automatic Power O Function
The unit automatically turns to Standby mode
after about 15 minutes if the TV or the external
unit is disconnected, switched o or the volume is
too close to mute.
• To switch the unit o completely, remove the
mains plug from the mains socket.
• Please turn the unit off completely to save
energy when not in use.
8.3 Select Modes
Press the (SOURCE) button on the unit or the
AUX, BT, OPT/COA, HDMI 1/2, HDMI eARC and
USB and buttons on the remote control to select
the desired mode. The selected mode will show
on the display.
8.4 Adjust the Bass/Treble Level
• Press the BASS +/- buttons on the remote
control to adjust bass level.
• Press the TREBLE +/- buttons on the remote
control to adjust bass level.
8.5 Turn the Surround Sound ON/OFF
• Press the VERTICAL/SURROUND button on
the remote control to turn on the surround
sound. Press this button again to turn o the
surround sound.
8.6 Select Equalizer (EQ) Eect
Press the VOICE / SPORT / MOVIE / MUSIC
buttons on the remote control to select your
desired preset equalizer eects.
8.7 Adjust the Volume
• Press the + / - (VOL) buttons on the unit or
on the remote control to adjust the volume.
• If you wish to turn the sound o, press the
(MUTE) button on the remote control.
Press the
(MUTE) button again or press
the + / - (VOL) buttons on the unit or on the
remote control to resume normal listening.
8.8 Adjust the Brightness
- Press the DIMMER button on the remote
control to select brightness level.