How to Guide

Assembly Instructions

Model TVM-021

Stage 1

Please not stand is best assembled from bottom up.

1.1 Place foot bolts (IB-4) through bottom shelf (B Glass) and the holes at the bottom of the cable tidy.

Then screw the foot bolts into the cable tidy nuts until tight.

1.2 Screw in the I bolts (IB-2) to top of each foot tube (FT).

1.3 Place I bolts (IB-2) in the foot tubes through bottom shelf. Then screw tubes (TB) onto each exposed bolt until

tight.

1.4 Screw in I bolts (IB-2) to the top of each tube.

1.5 Place middle shelf (M Glass) in position over each tube leg with I bolts passing through holes in each corner of the

shelf and resting on support pegs located on cable tidy.

Stage 2

2.1 Screw tubes (TB) onto I bolts until tight

2.2 Screw in I bolts (IB-1) to top of tubes.

2.3 Place top shelf (T Glass) over I bolts resting on tubes.

2.4 Secure top glass with chrome caps.

e 3