How to Guide

Assembly Instructions

Model TVM-060

Stage 1

Please note stand is best assembled from the bottom up.

1.1 Screw in I bolts (I B-2) to the top of each foot tube (FT).

1.2 Place bottom shelf (B Glass) in position over each foot tube leg with I bolts passing through holes in each

corner of the shelf. Then screw long tubes (T-L) onto each exposed bolt until tight.

1.3 Screw in I bolts (I B-2) to the top of each long tube (T-L).

Stage 2

2.1 Place middle shelf (M Glass) in position over each long tube leg with I bolts passing through holes in each

corner of the shelf. Then screw short tubes (T-S) onto I bolts until tight.

2.2 Screw in I bolts (I B-1) to top of short tubes.

2.3 Place top shelf (T Glass) over I bolts resting on short tubes.

2.4 Attach cable tidy to top glass and bottom glass with small chrome cap (CC-S) ---- screw I bolts(I B-3) to

small chrome cap. Then screw I bolts through the cable tidy nuts.

2.5 Secure top glass with large chrome caps (CC-L)

e 3/3