MODEL RTA - B002 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference.
MODELO RTA - B002 Gracias por comprar uno de nuestros productos. Por favor lea cuidadosamente las instrucciones de ensamblaje antes de instalar la unidad. Por favor guarde este manual para referencias futuras.
RTA-B002 DIMENSIONS Lowest position Product Size: 22"W x 16"D x 30.5~46.
P.
P.
P.
P.
P.8 4 5 6 1 Use Bolts D to fix the Mid Panel (6), Back Panel (4) & Front Panel (5) to the Left Panel (1). Make sure to tighten the cam locks on the inside face of the Panels (6,4&5) to secure the bolts. Use los Pernos de Ajuste D para fijar el Panel Medio (6), Panel Posterior (4) y el Panel Frontal (5) al Panel Izquierdo. Asegurese de ajustar los cerrajes en la cara posterior de los Paneles (6, 4 y 5) para asegurar los Pernos.
P.9 3 X2 3 X2 7 4 2 1 7 Use Bolts D to fix the Bottom Panel (7) to the semi structure built in Step 2 making sure to tighten the cam locks on the inside face of the Panels (1,4&2) to secure the bolts. Use Pernos de Ajuste D para fijar el Panel Inferior (7) a la semi estructura que ensablamos en el paso 2 Asegurese de ajustar los cerrajes en la cara posterior de los Paneles (1. 4 y 2) para asegurar los Pernos.
P.10 8 4 1 2 Use Bolts D to assemble the Top Panel (8) over the Back, Left and Right Panels (4,1,2). Make sure to tighten the cam locks on the inside face of each panel. Use Pernos de ajuste D para ensamblar al Panel Superior (8) sobre los paneles Derecho, Izquierdo y Posterior (4,1,2). Asegurese de ajustar los cerrajes en la cara posterior de los Paneles (1. 4 y 2) para asegurar los Pernos.
P.11 11A 9 Place the Plastic Cover (11A) on top of the Lateral Structure Tubes (9). Coloque la pieza plastica (11A) sobre los tubos de la Estructura Lateral (9). 10 11B Insert the Top Structure Tubes (10) into the Plastic Cover (11A), then screw in the Knob (11B) into the Plastic Cover (11A). 11B Inserte los tubos de la Estructura Superior en la Pieza Plastica (11A). Luego inserte los Tornillos de Ajuste (11B).
P.12 12 10 10 13 12 Tighten all screws well and enjoy your unit. You can adjust the height of the main panel with the screw knobs. Use Screws B to fix the Protector Tube (13) to the Main Panel (12). Use Tornillos B para fijar el Tubo Protector (13) al Panel Principal (10). Apriete bien todos los tornillos y disfrute su unidad. Note que puede ajustar la altura del panel principal con el Tornillo de Ajuste.
CARE AND MAINTENANCE English - DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE WARRANTY. - DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY TOWEL. - PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE REMOVED FROM THE PRODUCT.
PRODUCT WARRANTY TECHNI MOBILI DESK WARRANTY LIMITED 5-YEAR WARRANTY RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. "Defects" as used in this warranty imperfections that impair the use of the furniture or product.
