Manual

ManualsBrandsRTA Products ManualsComputer HardwareRTA-S06

B15 090521

MODEL RTA - S06MODEL RTA - S06

IMPORTANT: Surfaces must be cleaned with a

solution of a smooth soap and water, then cleared

with a dry towel. Do not use solvents over surfaces

or structural tubes.

IMPORTANT: Surfaces must be cleaned with a

solution of a smooth soap and water, then cleared

with a dry towel. Do not use solvents over surfaces

or structural tubes.

ASSEMBLY INSTRUCTIONASSEMBLY INSTRUCTION

MULTI-FUNCTIONAL COMPUTER TABLEMULTI-FUNCTIONAL COMPUTER TABLE

Thanks for purchasing one of our products, please read carefully the assembly

instructions before the installation (Attention: Do not tighten the screws before

all screws are in place).

Thanks for purchasing one of our products, please read carefully the assembly

instructions before the installation (Attention: Do not tighten the screws before

all screws are in place).

EnglishEnglish

MODEL RTA-S06MODEL RTA-S06

Summary of content (18 pages)

PAGE 1
English MULTI-FUNCTIONAL COMPUTER TABLE ASSEMBLY INSTRUCTION IMPORTANT: Surfaces must be cleaned with a MODEL RTA - S06 solution of a smooth soap and water, then cleared with a dry towel. Do not use solvents over surfaces or structural tubes. Thanks for purchasing one of our products, please read carefully the assembly instructions before the installation (Attention: Do not tighten the screws before all screws are in place).
PAGE 2
Spanish INSTRUCCIONES DE ENSAMBLAJE. IMPORTANTE: Para su limpieza sobre la MODELO RTA-S06 superficies utilice una toalla humedecida en una solución de agua y jabón de pasta y luego pase sobre esta un trapo seco. No utilice solventes, sobre las superficie ni las estructuras tubulares. Gracias por comprar uno de nuestros productos por favor lea cuidadosamente las instrucciones de ensamblaje antes de instalar la unidad.
PAGE 3
RTA-S06 PARTS LIST P.
PAGE 4
RTA-S06 P.4 18 17 19 Top Panel Panel Superior Back Panel Panel Posterior 21 20 L Bracket Angulo de Soporte 23A 22 23B Front Wheel Rueda Frontal 23D 23C 23 23E 23G 23F Support Tubes Tubos de Soporte SCREWS PART QTY. Top Glass Panel Vidrio del Panel Superior A,B,C-Metal Fittings; D-Lock; E-Metal Plate; F-Screws; G-Key A,B.C-Accesorios de Metal; D-Cerradura; EPlaca de Metal; G-Llave TORNILLOS ITEM PART QTY.
PAGE 5
RTA-S06 P.5 6X40MM BOLT INSTALLATION AS BELOW: 6x40mm INSTALE EL PERNO ASI: Bolt Perno Connecting piece Pieza de ajuste Adjust connecting piece direction if condition as illustrated Insert bolt when Connecting piece under Such condition Cuando la pieza de ajuste este desviada, debe alinearla antes de insertar el perno Inserte el Perno cuando la Pieza de ajuste este alineada A2. A1. STEPS A3.
PAGE 6
RTA-S06 P.6 3 2 1 SCREWS TORNILLOS A 6X40 MM 4PCS 4 Insert the Bolts A in the holes of the back face of the Top Drawer Front Panel (4) and tighten them with the screwdriver, then place the Top Drawer Left Panel (1) and the Top Drawer Right Panel (2) over the Bolts and tighten the nuts on the inside face.
PAGE 7
RTA-S06 P.7 6 Izquierdo Derecho Right Left 12 12 Align selected holes on slides as illustrated with predrilled holes on drawer box before inserting screws Haga coincidir los agujeros seleccionados en los Deslizadores con los agujeros pre-taladrados sobre el cajón de la gaveta(como indica la ilustración) antes de insertar los tornillos. SCREWS TORNILLOS C 3X15 MM 4PCS Use screws C to assemble the Slider (12) to the Top Drawer Left & Right Panels (1 & 2).
PAGE 8
RTA-S06 P.8 9 8 7 TORNILLOS SCREWS A 6X40 MM 9 4PCS Insert the Bolts A in the holes of the back face of the Bottom Drawer Front Panel (9) and tighten them with the screwdriver, then place the Bottom Drawer Left Panel (7) and the Bottom Drawer Right Panel (8) over the Bolts and tighten the nuts on the inside faces.
PAGE 9
RTA-S06 P.9 Izquierdo 13 12 Left 12 Derecho Align selected holes on slides as illu strated with pre-drilled holes on drawer box before inserting screws Right 11 2PCS 12 Haga coincidir los agujeros seleccionados en los Deslizadores con los agujeros pre-taladrados sobre el cajón de la gaveta(como Indica la ilustración) antes de insertar los tornillos. 10 9 9 TORNILLOS SCREWS C 3X15 MM 4PCS Insert the Tubes for Files (11). Inserte los Tubos para los Archivos (11).
PAGE 10
RTA-S06 P.10 16 15 23E 23F Tighten the metal plates on the marked position of the metal bar 23A 23F 9 13 23C 23A SCREWS TORNILLOS D 4X20 MM 2PCS Use screws D to fix the Handle (13) to the Bottom Drawer Front Panel (9). Use tornillos D para fijar la Manija (13) al Panel Frontal de Gaveta Inferior (9). First Slide into the Metal Bar (23E) the 4 Metal Fittings in the order shown in the drawing (23A,23C,23C,23A).
PAGE 11
RTA-S06 P.11 18 15 14 SCREWS 12 2PCS C 3X15 MM 12 2PCS Right Left TORNILLOS 8PCS Derecho Izquierdo Match the Sliders (12) with the holes of the inside faces of the Left & Right Panels (14 & 15). Then fix the fixed part to the Panels using screws C. Haga coincidir los Deslizadores (12) con los agujeros de la cara interna de los Paneles Izquierdo y Derecho (14 y 15).Luego fíjelos a los Paneles usando tornillos C.
PAGE 12
RTA-S06 P.12 20 17 15 14 16 Slide in Back Panel (17) between the Left & Right Panels (14 & 15). Deslice el Panel Posterior (17) entre los Paneles Izquierdo y Derecho (14 y 15). 21 18 SCREWS TORNILLOS A 6X40 MM 4PCS Insert the Bolts A in the holes of the Top Panel (18) and put it over the Left & Right Panels (14 & 15) and tighten all nuts well. Inserte los Pernos A en los agujeros del Panel Superior (18) y coloque éste sobre los Paneles Izquierdo y Derecho (14 y 15) y ajuste bién las tuercas.
PAGE 13
RTA-S06 P.13 22 3 2PCS 16 3 2PCS TORNILLOS SCREWS E 4X14 MM 18 16PCS Use screws E to fix the Casters (3) to the Bottom Panel (16). Use tornillos E para fijar las Ruedas (3) al Panel Inferior (16). 23 21 4PCS 22 SCREWS TORNILLOS G 6X20 MM 4PCS Use screws G to assemble the Support Tubes (21) with the Top Glass Panel (22). Use tornillos G para ensamblar los Tubos de Soporte (21) con el Vidrio del Panel Superior (22).
PAGE 14
RTA-S06 24 P.14 22 18 SCREWS TORNILLOS H 6X25 MM 4PCS Use screws H to assemble the Support Tubes (21) with the Top Panel (18). Use tornillos H para ensamblar los Tubos de Soporte (21) con el Panel Superior (18). 25 4 9 Slide in the drawers. Tighten all screw well and enjoy the cabinet. Deslice las Gavetas. Ajuste bien los tornillos y disfrute su gabinete.
PAGE 15
PAGE 16
PAGE 17
® PRODUCT WARRANTY TECHNI MOBILI DESK WARRANTY LIMITED 5-YEAR WARRANTY R TA Products, LLC warrants to the Original Purchaser that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. "Defects" as used in this warranty, is defined as any imperfections that impair the use of the furniture or product.
PAGE 18
Product Warranty - RTA Products http://rtaproducts.com/product-warranty.h 7. Any modification to the original product voids the warranty. We do not warrant the performance of the product when used in combination with other than original products. 8. This product has been designed for and is intended for office and home-office use only.