User`s manual

88
• Use the EPROMx.BIN file created to program EPROMs with an appropriate
EPROM programmer.
• With the cpuModule off, set jumpers JP1 and JP7 or JP2 and JP8 to the appropriate
settings for the EPROM you are using. Please see SSD Jumpers on page 102.
• Boot the cpuModule.
After booting, the Solid State Disk will be seen by the system as a write-protected floppy. DOS com-
mands normally used to read floppy disks will work with the SSD.
Directly Accessing the Solid State Disk
If you wish to directly access the Solid State Disk of the cpuModule, you may do so using an exten-
sion to interrupt 52H.
Contact the factory for additional information on doing so.