User`s manual

UPS25 13 RTD Embedded Technologies, Inc
Factory-Configured Jumper Settings
Table 2-1 below illustrates the factory jumper setting for the UPS25. Figure 2-1 shows
the board layout of the UPS25 and the locations of the jumpers. The following
paragraphs explain how to change the factory jumper settings to suit your specific
application.
Table 2-1 Factory configured jumper settings (Please see figure 2-1 below for more
detailed locations)
JUMPER NAME
DESCRIPTION
NUMBER OF JUMPERS
FACTORY SETTING
BASE
Base Address
3
300
IRQ
Host interrupt
7
N.C.
B2/B3 blobs
Charger control
3+3
C/2, Top off charge
enabled
Battery trip adjust
Input trip adjust
Address Jumpers
Interrupt Jumpers