User manual
13
3.1 Zones / Rooms setup
1. Change to system menu -> Music
2. Tap the rst of the 8 green bars on the list and change to the IO Conguration . The bars rep-
resent the 8 rooms / zones.
Caution At the Audiomatrix zone number 1 corresponds to output number 1.
3. Tap the title bar and enter a name for the room, e.g. kitchen. 3.
4. As sources select ‘Music Mixer’ for the Audiomatrix, ‘myPlayer’ for the intergrated
myGEKKO Touch MP3 player and ‘NetPlayer’ for the Barix Exstreamer.
3.2 Assign push-buttons
You may assign a maximum of 10 push-buttons to each zone / room.
With 4 separate push-buttons for the following function:
Push-button ON/+ Push shortly = Zone ON, Push shortly = Volume up
Push-button OFF/- Push shortly = Zone volume down, Push & hold = OFF
Push-button Forwards Push shortly = Next track, Push & hold = Next playlist
Push-button Backwards Push shortly = Previous track, Push & hold = Previous
If the same push-button is used for push-button ON/+ and pushbutton OFF/-:
Push shortly = ON, Push shortly = VOLUME UP,
Push shortly then push & hold = Volume down, Push & hold = OFF.
The push-buttons 1-8 can be used to choose directly between playlists. The setup and selection of the
playlist has to be made on the parameterisation level
. The playlists must have been created al-
ready (see next section).
3.3 Switching of the power amplier
1. Each zone / room has a digital output which can be used to switch a power amplier. The output
is switched ON if the zone is ON and is o if the zone is OFF.
2. HINT: If more zones are in use the outputs can be connected via a logic and the power amplier
switches o automatically when all zones are switched OFF.
Zone conguration and push-button assignment
3. Music menu on the myGEKKO Touch