It’s® Under Control® It’s Under Control T2-B Operation Guide Universal System Controller 70-210035-18 V1.
T2-B Universal System Controller Copyright © 2008 Remote Technologies Incorporated All rights reserved.
It’s Under Control® Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
T2-B Universal System Controller BATTERY DISPOSAL Li-ion For environmental reasons, your T2-B Universal System Controller uses “environmentally sound” Lithium-ion rechargeable batteries. These batteries do not contain any poisonous heavy metals that can damage the environment. In the interest of recycling, please do not dispose of these batteries in the household waste at the end of their useful life. Instead, dispose of them at an appropriate collection site. SAFETY SUGGESTIONS Read Instructions.
It’s Under Control® WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
T2-B Universal System Controller Limited Warranty and Disclaimer Remote Technologies Incorporated warrants its products for a period of one (1) year (90 days only for included battery packs) from the date of purchase from Remote Technologies Incorporated or an authorized Remote Technologies Incorporated distributor.
It’s Under Control® Table of Contents Federal Communications Commission Notice................ 3 Battery Disposal........................................................... 4 Safety Suggestions....................................................... 4 Limited Warranty and Disclaimer ................................ 6 Table of Contents......................................................... 7 Chapter 1 - Welcome.................................................... 9 Compatibility.............................
T2-B Universal System Controller
It’s Under Control® Chapter 1 | Welcome Thank you for purchasing the T2-B Universal System Controller. The T2-B combines the power and flexibility of a graphic LCD touchscreen with an ergonomic design that permits effortless one-handed operation. This design overcomes the need for a compromise between form and function. Sleek and perfectly balanced, the T2-B takes complete control of the home theater, replacing all other remotes.
T2-B Universal System Controller Chapter 1 | welcome UNPACKING AND INSPECTION After unpacking your new T2-B Universal System Controller, save all of the packing materials in case you ever have to ship the unit. Thoroughly inspect the T2-B and packing materials for signs of damage. Report any damage to the carrier immediately. Report any equipment malfunctions to Remote Technologies Incorporated or an authorized Remote Technologies Incorporated distributor.
It’s Under Control® Chapter 2 | introduction FEATURES The T2-B provides superior quality and reliability as well as these features: Comfortable ergonomic design permits effortless, one-handed operation. Easy-to-read LCD to display custom buttons, text, graphics and scrolling lists. Digital matrix touchscreen never needs calibration. Tilt switch can automatically turn on the backlight when picked up. Extremely bright, backlit display and keypad. Three-way rocker switch for scrolling list navigation.
T2-B Universal System Controller Chapter 2 | introduction CLEANING Occasional cleaning may be required, depending on use. It is recommended that you create a “Clean” button somewhere on the Home page of the T2-B. This button should link to a page that does not contain commands or macros that could be inadvertently executed while cleaning the unit.
It’s Under Control® or does not need to be charged. A fully discharged battery will take approximately 2-4 hours to completely re-charge. GETTING STARTED NOTE: The following steps for initial installation including removing the battery door should be performed by an authorized service center or trained installer only. Start by inserting the battery connector into the mating plug on the T2-B. Make sure the connector is oriented properly before attempting to insert it.
T2-B Universal System Controller Chapter 2 | INTRODUCTION REMOTE REFERENCE FRONT IR TRANSMISSION WINDOW LIGHT SENSOR TOUCHSCREEN DISPLAY HOME PAGE BUTTON FRAME SCROLL BUTTONS 3-WAY ROCKER SWITCH KEYPAD BUTTONS BACKLIGHT BUTTON 14
It’s Under Control® BACK AUDIO SPEAKER LITHIUM-ION BATTERY PACK POWER SWITCH USB PROGRAMMING PORT DOCKING STATION CONTACTS 15
T2-B Universal System Controller Chapter 2 | INTRODUCTION DOCKING STATION REFERENCE TOP CHARGE CONTACTS CHARGE LED BACK 2-1/2 in.
It’s Under Control® Chapter 3 | operation PROGRAMMING THE T2-B The T2-B is programmed using Integration Designer™ software, RTI dealers can download the software from: www.rticorp.com/dealers A PC running Windows® 2000 or higher with a USB port is required. The required USB cable is included with the RTI IR-PRO dealer kit. THE TOUCHSCREEN DISPLAY The touchscreen display is organized as a series of pages and frames.
T2-B Universal System Controller Chapter 3 | operation THE CONTROL PANEL PAGE The Control Panel page can be displayed by pressing and holding the backlight key for at least 3 seconds. You can also access the Control Panel page by assigning a “Control Panel” page link to a button using Integration Designer™ software. The Control Panel consists of the following two frames: To change frames, press the frame Left buttons on the bottom of the touchscreen.
It’s Under Control® BEEPER This button displays a window that allows you to turn the audible beep On or Off. The beeper provides feedback that a button was pressed. Press the OK button in the window to close. TIME OUT This button displays a window that allows you to adjust the amount of time the unit stays awake after the last button press. The time is variable from 1 second to 60 seconds (default is 10 seconds). Press the arrows to the left or right of the Time Out setting to adjust the time.
T2-B Universal System Controller Chapter 3 | operation LIGHT SENSE This button displays a window that allows you to enable or disable the front panel ambient light sensor. On means the Light Sensor is enabled. This will cause the backlight brightness to dim or brighten in response to changes in the ambient room light. Off means the Light Sensor is disabled. Press the OK button in the window to close.
It’s Under Control® CHANGE PASSCODE This button displays a window that allows you to set the passcode that is used to limit access to the Clear All function on the control panel page, as well as the Button Lockout function that is available on all buttons. When you press the Change Passcode button, the screen will prompt you to enter the old passcode using the hard keys, then press the Enter key on the keypad. (The default code is 0000). Now enter a new four-digit passcode, then press Enter.
T2-B Universal System Controller Chapter 3 | operation CLEAR ALL This button displays a window that will allow you to erase the current program in the remote. When the button is pressed, you will be prompted to enter the current passcode. If the proper code is entered, the entire program in the remote will be erased.
It’s Under Control® Chapter 4 | Power Power Management Infrared Control Range Infrared Frequency Transmission Range Specifications 3.6 VDC, 1200 mAh Lithium-Ion Battery Pack Automatic On/Off (tilt switch) 30 feet (9.1 meters) @ 60 degrees 15 kHz - 460 khz Radio Frequency Control Range Up to 100 feet (30.
T2-B 24 Universal System Controller
It’s Under Control® Chapter 5 | Troubleshooting If you are having problems with your T2-B Universal System Controller, please read the information below before contacting technical support. If you continue to have problems, see Chapter 6 for more information on contacting RTI technical support. DISPLAY IS DIM, BLANK OR UNREADABLE Make sure the battery pack connector is attached properly and the battery is charged.
T2-B 26 Universal System Controller
It’s Under Control® Chapter 6 | Service and Support For news about the latest updates, new product information, and new accessories, please visit our web site at: www.rticorp.com CONTACTING RTI For general info, you can contact RTI at: Tel. (952) 253-3100 Fax (952) 253-3131 info@rticorp.com RTI TECHNICAL SUPPORT At RTI, customer service and satisfaction is an utmost priority.
T2-B Chapter 6 Universal System Controller | Service and Support Shipment of T2-B for Service RTI will pay all labor and material expenses for all repairs covered by this product’s warranty. If necessary repairs are not covered by warranty, or if a unit is examined which is not in need of repair, you may be charged for the repairs or examination. If it is necessary to ship the T2-B Universal System Controller for service: Please pack it securely (we suggest that it be insured).
It’s Under Control® Index Battery....................................................................................... 12 Disposal..................................................................................... 4 Cleaning...................................................................................... 12 Compatibility................................................................................. 9 Contents.......................................................................................
T2-B Universal System Controller It’s Under Control® Remote Technologies Incorporated 5775 12th Avenue East, Suite 180 Shakopee, MN 55379 Tel: 952-253-3100 Fax: 952-523-3131 www.rticorp.com © 2008 Remote Technologies Inc. All rights reserved. Printed in Taiwan.
