CLD Color Keypanel Family User Manual

4
Specifications
LCD Display
Size
4.9” LCD
Resolution:
320 x 96 (RGB)
Input Sources
Panel Microphone / GPIO MIC IN
Electric Microphone Input Level
Nominal Level
-42.5dBu
Maximum Level
-22.5dBu
Impedance
1 to 10kΩ
Headset
Dynamic Microphone Input Level
Nominal Level
-50dBu
Maximum Level
-30dBu
Impedance
≤600 Ω
Electric Microphone Input Level
Nominal Level
-45dBu
Maximum Level
-25dBu
Impedance
1 to 10kΩ
Keypanel Input
Nominal Input Level
8dBu
Maximum Input Level
20dBu
Auxiliary Input
Nominal Input Level
8dBu
Maximum Input Level
20dBu
Output Sources
Keypanel Output
Nominal Input Levels
8dBu
Maximum Input Level
20dBu
Frequency Response
100 - 15kHz ±2dB
MIC OUT
Nominal Input Level
8dBu
Maximum Input Level
20dBu
Frequency Response
100 - 15kHz ±2dB
Headphone Speaker
Power
80mW into 600Ω
Impedance
≥8Ω
Panel Speaker
Frequency Response
250 - 15kHz ±2dB
Sensitivity, W/dB
84
Power
4W, 8Ω
Tone Generator
Output Level
8dBu
Output Frequency
500Hz or 1kHz
General IO
1-4 Relay Outputs
1-2 Open Collectors
1-4 Opto-Isolators
Connectors
a
Panel Microphone 1/4” Jack (see “1 1/4” Stereo Jack (Panel Mic)”
on page 11 for pinouts).
Panel Headset 4-, 5-, 6-pin Female XLR (see “4-, 5-, 6-, 7-pin
XLR(Female) Headset” on page 11 for
pinouts).
USB USB Type A
Keypanel Audio
Input / Output
DB-9, RJ-45 (Supports RTS RJ-11 cabling or
Standard Cat5 cabling) See “RJ-45 Frame (RTS
RJ11 Cable)” and “DB-9 (male) Frame” on
page 12 for pinouts.
Expansion RJ-45 (see “RJ-45 EXP (expansion)” on
page 13 for pinouts).
GPIO MIC OUT Male XLR-3 (see “XLR-3(male) - Mic OUT”
on page 12 for pinouts).
GPIO MIC IN Female XLR-3 (see “XLR-3(female) - Mic IN”
on page 12 for pinouts).
GPIO Aux 1-2 Female XLR-3 (see “XLR-3(female) - AUX 1
& 2” on page 12 for pinouts).
GPIO Aux 3-6 DB-15 (see “DB-15 (male) Aux 3, Aux 4, Aux
5, Aux 6” on page 11 for pinouts).
GPIO Headset DB-9 (see “DB-9 (male) Headset” on page 12
for pinouts).
GPIO Relays 1-4 DB-9 (see “DB-9 Relay 1, 2, 3, 4” on page 11
for pinouts).
GPIO Open
Collector 1-2
DB-9 (see “DB-9 (male) Open Collector (1-2)”
on page 11 for pinouts).
GPIO Opto-
Isolators 1-4
DB-9 (see “DB-9 (male) Opto-Isolator (1-4)”
on page 11 for pinouts).
General
KP 32 CLD
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Operating Temperature
-15° C to 50°C (5°F to 122°F)
Dimensions
19”L x 3.47”H x 3.25”D (482.6mm x 88.138mm x 82.55mm)
Weight
6.30 lbs (2.85kg)
Power Consumption
Quiesent - 10W
Full Load - 35W
Input Power
100~240VAC, 50-60Hz
DKP 16 CLD
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Operating Temperature
-15° C to 50°C (5°F to 122°F)
Dimensions
3.2”H x 10.1”W x 9.2”D (81.28mm x 256.54mm x 233.68mm)
Weight
TBD
Power Consumption
Quiesent - 8W
Full Load - 33W
Input Power
TBD
a. See the DKP 16 CLD Reference View on page 10 or the EKP 32 CLD Reference
View on page 152 for the connectors associated with each device.