CLD Color Keypanel Family User Manual

111

Service Menu, Aux Inputs

Aux Inputs enables or disables the auxiliary input audio path to any output. The KP 32 CLD has six(6) Aux Input connectors

on the back panel of the unit. See the “KP 32 CLD Block Diagram” on page 5.

By default, Matrix In is enabled.

NOTE: This feature is only enabled if the GPI 32 CLD option card is installed.

NOTE: There are only three (3) Aux Inputs available on the DKP 16 CLD.

To enable/disable the aux inputs, do the following:

1. On the KP 32 CLD keypad, press MENU.

The Top Level menu appears.

2. Using the 3(↑) or 6(↓), select Service.

3. Press the SEL button.

The Service submenu appears in the display window.

4. Using the 3(↑) or 6(↓), select Aux Inputs.

5. Press the SEL button.

Aux In 1, Aux In 2, Aux In 3, Aux In 4, Aux In 5, Aux In 6, and Matrix In appear in the display window.

6. Using the 3(↑) or 6(↓), select one of the inputs.

7. Press the SEL button.

Disabled and Enabled appear in the display window.

8. Using the 3(↑) or 6(↓), select Enabled to enable the selected Aux Input.

Select Disabled to disable the selected Aux Input.

Service Menu, Baud Rate

Baud Rate indicates the baud rate at which data is transmitted to the matrix.

Baud rates available for selection are:

Auto Baud - the baud rate is determined automatically by the Matrix.

9600 Baud (default)

76.8K Baud

To set the baud rate, do the following: