CLD Color Keypanel Family User Manual

117

8. Using the 3(↑) or 6(↓), select Always On to have the keypad backlight always ON.

Using the 3(↑) or 6(↓), select Always Off to have the keypad backlight never ON

Using the 3(↑) or 6(↓), select Activate to have the keypad turn ON when the keypad is pressed.

Service Menu, Local GPIO

Local GPIO is used to assign GPIO inputs and outputs. You can only use this option if your KP 32 CLD has an optional

Connector Module. Inputs can be assigned to activate intercom keys (including group master keys and a solo key). Outputs can

be activated by intercom keys.

NOTE: This feature is only enabled if the GPI 32 CLD option card is installed.

NOTE: The DKP 16 CLD has only three (3) Opto Connectors available.

To setup GPIO inputs talk key, do the following:

1. On the KP 32 CLD keypad, press MENU.

The Top Level menu appears.

2. Using the 3(↑) or 6(↓), select Service.

3. Press the SEL button.

The Service submenu appears in the display window.

4. Using the 3(↑) or 6(↓), select Local GPIO.

5. Press the SEL button.

GPIO Inputs and GPIO Outputs appear in the display window.

6. Using the 3(↑) or 6(↓), select GPIO Inputs.

FIGURE 118. Service Menu - Keypad Backlight Option

FIGURE 119. Service Menu - GPIO Inputs