CLD Color Keypanel Family User Manual

119
12. Using the 3(↑) or 6(↓), select the group you want to assign the GPIO Input to.
A blue arrow appears next to the selected option.
To setup GPIO outputs talk key, do the following:
NOTE: There are no open collectors available on the DKP 16 CLD.
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3(↑) or 6(↓), select Service.
3. Press the SEL button.
The Service submenu appears in the display window.
4. Using the 3(↑) or 6(↓), select Local GPIO.
5. Press the SEL button.
GPIO Inputs and GPIO Outputs appear in the display window.
6. Using the 3(↑) or 6(↓), select GPIO Outputs.
7. Press the SEL button.
OC Out 1, OC Out 2, Relay 1, Relay 2, and Relay 3 appear in the display window.
8. Using the 3(↑) or 6(↓), select Relay 1, Relay 2, Relay 3, OC Out 1, and OC Out 2.
9. Press the SEL button.
Not Assigned, Talk Key, UPG 1 and UPG 2 appear in the display window.
10. Using the 3(↑) or 6(↓), select Talk Key.
11. Press SEL.
Tap Key appears in the display window.
12. Tap the key you want to assign the GPIO Output assignment.
The selected keypanel key turns red.
FIGURE 121. Service - Key Group Options
FIGURE 122. Service Menu - GPIO Output Options