CLD Color Keypanel Family User Manual

37
User Programmable Keys
UPG 1 and UPG 2 (see Figure 2 and Figure 4) gives you the option to assign frequently used menu items to a single key on
the keypanel, eliminating the need to navigate through the menu structure. Not all menu items can be programmed to the UPG
keys, such as any assignment group menu, any TIF menu items, or scrolling menu items. Basically, any menu that requires
context or history cannot be saved. If a menu item cannot be saved, a prompt appears in the display window showing Cannot
save this menu position.
NOTE: You can even program a UPG key to activate the screen saver option on the keypanel. For more information, see
“To activate the screen saver from a UPG key” on page 37.
The UPG keys can also be used to activate relays. When a relay is assigned to the key, and while the keypanel is not in menu
mode, pressing the UPG key activates the relay for as long as the UPG key is held down. Once the key is released, the relay
becomes inactive.
To assign a menu item to a UPG key, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3(↑) or 6(↓), navigate to the menu item you want to assign to either UPG 1 or UPG 2.
3. Press and hold the UPG key for two (2) seconds.
Menu position saved appears in the display window.
To assign a relay to a UPG key, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3(↑) or 6(↓), select Service.
3. Press SEL.
The Service menu appears.
4. Using the 3(↑) or 6(↓), select Local GPIO.
5. Press SEL.
GPIO Inputs and GPIO Outputs appears in the display window.
6. Using the 3(↑) or 6(↓), select GPIO Outputs.
7. Press SEL.
OC Out 1, OC Out 2, Relay 1, Relay 2, and Relay 3 appear in the display window.
8. Using the 3(↑) or 6(↓), select the Relay 1, Relay 2, or Relay 3.
9. Press SEL.
Not Assigned, Talk Key, UPG 1, and UPG 2 appear in the display window.
10. Using the 3(↑) or 6(↓), select UPG 1 or UPG 2.
The relay is assigned to the desired UPG key.
NOTE: Once a relay is programmed to the key, and the keypanel is not in menu mode, pressing the UPG
key activates the assigned relay until the key is released.
To activate the screen saver from a UPG key, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3(↑) or 6(↓), select Service.
3. Press the SEL button.
The Service menu appears.
4. Using the 3(↑) or 6(↓), select Scrn Saver.
Activate, Delay and Mode appear.