CLD Color Keypanel Family User Manual

By default, the microphone signal is routed to the matrix, and the matrix signal is routed to the speaker and to the left and right

headphones.

The sources available for mixing and sending are as follows:

• Aux 1 – 6 (This feature is only available when GPI 32 CLD option card is installed)

• Headset Mic

• Matrix

• Panel Mic

• Rear Headset Mic (This feature is only available when GPI 32 CLD option card is installed)

• Rear Panel Mic (This feature is only available when GPI 32 CLD option card is installed)

NOTE: If all resources are being used, the Rear Panel Mic is not available.

To configure mixing on the KP 32 CLD, do the following:

1. On the KP 32 CLD keypad, press MENU.

The Top Level menu appears.

2. Using the 3(↑) or 6(↓), select Audio Options.

3. Press the SEL button.

The Audio Options submenu appears.

4. Using the 3(↑) or 6(↓), select DSP Funcs.

5. Press the SEL button.

The DSP Funcs menu appears in the display window.

6. Using the 3(↑) or 6(↓), select Mixing.

SOURCE

Front Pane Mic

Matrix Audio In

Front Headset Mic

Rear Headset Mic

Rear Panel Mic

Aux IN 1

Aux IN 2

Aux IN 3

Aux IN 4

Aux IN 5

Aux IN 6

DESTINATION

Matrix OUT XXXXXXXXXXX

Front Speakers XXXXXXXXXXX

Front Headset Left XXXXXXXXXXX

Front Headset Right XXXXXXXXXXX

Rear Headset Left XXXXXXXXXXX

Rear Headset Right XXXXXXXXXXX

Rear Speaker Left XXXXXXXXXXX

Rear Speaker Right XXXXXXXXXXX

Mic OUT XXXXXXXXXXX