CLD Color Keypanel Family User Manual

Audio Options Menu, Panel Mic

The Panel Mic menu option is used to configure how the panel mic operates. When a GPI 32 CLD option card is installed,

Front and Rear options are displayed.

You can configure the speaker with one of the following:

Disabled

Enabled

Switched (default) - when enabled, whichever mic is selected, the corresponding speaker/headphone is active.

To configure the Panel Mic, do the following:

1. On the KP 32 CLD keypad, press MENU.

The Top Level menu appears.

2. Using the 3(↑) or 6(↓), select Audio Options.

3. Press the SEL button.

The Audio Options menu appears.

4. Using the 3(↑) or 6(↓), select Panel Mic.

5. Press the SEL button.

Front and Rear appear.

NOTE: All four (4) mics cannot be enabled at the same time. If three mic sources are turned ON, the rear panel mic

is not available. For example, if the front panel mic, the front headset mic, and the rear headset mic are

configured as Enabled, the rear panel mic is not available.

6. Using the 3(↑) or 6(↓), select either Front or Rear.

7. Press the SEL button.

Disabled, Enabled, and Switched appears.

8. Using the 3(↑) or 6(↓), select the mode.

FIGURE 60. Audio Options - Panel Mic Front Rear Options

FIGURE 61. Panel Mic Enabled, Switched, and Disabled Options