CLD Color Keypanel Family User Manual

75
5. Press the SEL button.
Front and Rear appear.
6. Using the 3(↑) or 6(↓), select either Front or Rear.
7. Press the SEL button.
Always On, Disabled, and Switched appears.
8. Using the 3(↑) or 6(↓), select the option you want to configure.
9. Press the SEL button.
A blue arrow appears next to the selected option.
Audio Options Menu, Tone Gen
Tone Gen (tone generation) allows the user to turn the tone generator ON or OFF. The tone generator is used to check the
audio path from the keypanel to the matrix.
There are two tones available:
500Hz Tone (default)
1kHz Tone
The selected tone can be activated from either the menu or from the keypad.
To enable/disable the tone generator, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3(↑) or 6(↓), select Audio Options.
3. Press the SEL button.
The Audio Options menu appears.
4. Using the 3(↑) or 6(↓), select Tone Gen.
5. Press the SEL button.
Frequency, Tone Off, and Tone On appear in the display window.
FIGURE 64. Audio Options - Front Rear Options
FIGURE 65. Audio Options - Speaker Options