CLD Color Keypanel Family User Manual

84
Display Menu, Matrix
Matrix displays the intercom system name for all talk level 1 key assignments. The local intercom is represented by a green
key, while a remote intercom is represented by a red key. If a key assignment is not present on a key, an unassigned key
displays.
In non-trunked intercom systems, the intercom system name is always LOCL (local). In trunked systems, intercom system
names are created in TrunkEdit (Intercoms|Names).
To display the matrix intercom system name, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Verify Display is selected.
3. Press the SEL button.
The Display submenu appears.
4. Using the 3(↑) or 6(↓), select Matrix.
5. Press the SEL button.
The Matrix display appears showing the matrix intercom system (see Figure 79).
Display Menu, Panel ID
Panel ID displays the port number to which the keypanel is connected (used only with an AIO-8 card). The calculation is
based on the data group to which the keypanel is connected. If the address switch is incorrectly set, the wrong panel ID
displays. There is no need for this address if an AIO-16 card is used. Address setting is automatically generated when an
AIO-16 card is used.
NOTE: When the keypanel is not scroll enabled, the Panel ID displays only the port number in the panel display window.
When the keypanel is scroll enabled, the port number and port alpha are displayed.
To display the panel ID, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Verify Display is selected.
3. Press the SEL button.
The Display submenu appears.
4. Using the 3(↑) or 6(↓), select Panel ID.
5. Press the SEL button.
The Panel ID display appears showing the port number and alpha (if applicable) for the keypanel (see Figure 80).
FIGURE 79. Display Menu - Matrix