CLD Color Keypanel Family User Manual

85
Display Menu, Solo
Solo displays all keys with the solo assignment. For more information on the solo assignment, see “Key Options Menu,
Latching” on page 103.
To display the Solo Key information, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Verify Display is selected.
3. Press the SEL button.
The Display submenu appears.
4. Using the 3(↑) or 6(↓), select Solo.
5. Press the SEL button.
The Solo display appears showing solo keys in red (see Figure 81).
NOTE: You may only assign one solo key at a time.
Display Menu, Version
Version displays the firmware version currently running on the keypanel.
NOTE: For firmware upgrades, contact customer service. The KP 32 CLD firmware can be upgraded through AZedit.
To display the firmware version currently loaded on the keypanel, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Verify Display is selected.
FIGURE 80. Display Menu - Panel ID
FIGURE 81. Display Menu - Solo