Specifications

RTS 2nd Generation SERVO AMPLIFIER
36
PVD 3487 GB 03/2004
DESCRIPTION
N° NAME TERMINAL BLOCK X1
7
8
9
10
I RED
% I max
R(KΩ)
0 VA
SPEED
OR
I OUT
SPEED
EN.
I
-
O
I
A
nalogue reduction of current.
Reduction may be controlled either
by voltage or by resistor between 7
and 8.
This input may be used for example
when the servo motor is against a
mechanical abutment.
Resistor value :
10 30 50 70 90 100
3.32 10 22,1 39.2 56.2 infinity
0 V reference to be connected
internally in the casing
Signal providing speed or current
image depending on selector switch
S2 position.
± 10 V corresponds to max speed or
current value. (Pulse current value
shown in RTS characteristics chart).
See also identification section.
Typical uses :
motion synchronisation, master-slave
mode, cutting tool wear monitoring...
To be connected via an external
contact to terminal 13 to enable
speed reference. Typical uses : limit
switch, emergency stop
TERMINAL