Specifications

MANFROTTO
MONOPODS
TRIPODS
475
PHOTO - VIDEO - PRO AUDIO
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-290-6750 • www.bhphotovideo.com
MANFROTTO MONOPODS
Sections
Minimum Height Maximum Height
Weight
Load Capacity
676B 4 18.9˝ 60.6˝ 14.1 oz. 10 lbs.
679/679B 3 25.2˝ 63.8˝ 1.3 lbs. 22 lbs.
680/680B 4 20˝ 60.6˝ 1.8 lbs. 22 lbs.
681/681B 3 26.4˝ 63.4˝ 1.7 lbs. 26.4 lbs.
682/682B 3 29.1˝ 67.7˝ 2.4 lbs. 26.4 lbs.
684B 3 27.9˝ 65.6˝ 1.6 lbs. 17.6 lbs.
694 4 20.9˝ 65˝ 1.3 lbs. 11 lbs.
695 5 18.1˝ 63˝ 1.3 lbs. 11 lbs.
3245 3 26.7˝ 65.4˝ 1 lbs. 17.6 lbs.
3232 Swivel Tilt Head (BO3232)
Simple tilt head to allow a camera on a
monopod to be turned 90° to provide either
vertical or horizontal format ..................17.95
3229 Swivel Tilt Head
with Quick Release
(BO3229)
Same as 3232 but with quick release camera
plate and secondary safety lock ..............29.95
3248 Shoulder Brace
(BO3248)
Fits the top end of any monopod to give
additional stability. Adjustable length with
pivoting shoulder support ......................17.95
678 Universal Folding Base
(BO678)
Allows the addition of a base made of three
foldable high strength steel legs to the
monopods 679, 680, and 681. The legs can be
folded and stored inside the bottom section
of the monopod ready in a few seconds
when needed............................................42.50
3247 Monopod Belt Pouch
(BO3247)
Worn on a belt, this easy to use pouch offers
support for the base of a monopod .......14.95
449SPK2 Rubber/Stainless Steel
Spiked Foot
(BO449SP2)
Reversible spiked foot supplied with a
dedicated fixing tool. The spike is made of a
special hard stainless steel alloy extremely
resistant to corrosion. For 3449..............17.95
676SP2 Rubber/Stainless Steel
Spiked Foot
(BO676SP2)
Same as the above spiked foot, but for
monopods 679 and 680 ..........................17.50
677SP2 Rubber/Stainless Steel
Spiked Foot
(BO677SP2)
Same as above, for 681 monopod ..........16.95
449SC2 Suction Cup/Retractable
Spike Foot
(BO449SC2)
A rubber suction cup foot with retractable
stainless steel spike. The suction cup increas-
es the footprint of the monopod by almost
20 times, giving much greater stability when
needed. The foot can be removed and
replaced at will. For the 3449..................28.95
676SC2 Suction Cup/Retractable
Spike Foot
(BO676SC2)
Same as above for the 679 and 680........23.95
3422 Monopod Support
(BO3422)
Fixed on the monopod, adds two points of
support making it stable on any surface
regardless of the inclination. Allows long
exposures on automatic release. Comes
complete with the 3009 ballhead. Attachment
- 3/8˝ female for monopod.....................45.00
3421 Long Lens Monopod Bracket
(BO3421)
Specifically developed for use with very long
lenses on monopods. Key features: friction
base which enables the bracket to pan on
monopod, also can be used on a tripod.
Two rubber hand grips plus rubber
protection to prevent damage to lens when
tilted to maximum. Variable center height
adjustment in three steps......................154.95
3257 Spiked Foot for Monopod
(BO3257)
Converts 679, 680 and 681 series monopods
rubber foot to a spiked foot....................14.95
677SP Rubber/Spiked Foot
(BO677SP)
Rubber foot for with retractable metal spike,
for monopods 679, 680 and 681.............16.95
677SC Suction Cup/Retractable
Spike Foot
(BO677SC)
A rubber suction cup foot with retractable
stainless steel spike for the 681 monopod.
The suction cup increases the footprint of
the monopod by almost 20 times, giving
much greater stability when needed. The foot
can be removed and replaced at will......28.95
3229
Swivel Head
678
Folding Base
3247 Belt Pouch
3422 Monopod
Support
677SC Foot