Instruction manual

Opening DV-MUX3
Case
The DV-MUX3 jumpers are located on its boards. The boards are attached to the
rear panel. To reach the internal jumpers:
•
Disconnect all the cables connected to the DV-MUX3.
•
Unscrew the two large captive screws located on the rear panel.
•
Carefully pull the rear panel out. The internal boards will slide out together
with the panel. The DV-MUX3 has several tall components which barely
clear the top cover: make sure you do not damage these components.
Figure 2-1. DV-MUX3, Identification of Internal Modules
CHAPTER 2 - INSTALLATION
2-4 DV-MUX3 Installation and Operation Manual