Instruction manual

B-2. INTERCHANGE OF INTERFACE BOARDS
WARNING
Before carrying out the following procedure,read carefullythe
WARNING and CAUTION appearing on page 2-3 of this
manual.
Interface Board
Interchange
•
Open DV-MUX3 case in accordance with the instructions appearing in the
Opening DV-MUX3 Case section in para. 2-4.
•
Refer to figure B-2 and identify the interface boards.
•
Release the screws fastening the two boards.
•
Remove the boards and interchange their positions.
•
Close DV-MUX3 case in accordance with the instructions appearing in the
Opening DV-MUX3 Case section in para. 2-4.
Figure B-2. Board Identification
APPENDIX B - DV-MUX WITH MIX OPTION
B-2 DV-MUX3 Installation and Operation Manual