Instruction manual

APPENDIX C.
RACK INSTALLATION
Contents Page
General ................................ C-1
Installation of Single DV-MUX3 Unit .................. C-2
Installation of Two DV-MUX3 Units .................. C-3
C-1. GENERAL
The DV-MUX3 can be installed in 19" racks. Unit height corresponds to 1U
(1.75"), and the width is slightly less than half of the available mounting width.
Two rack adapter kits are available; one kit provides the hardware necessary for in-
stallation of a single unit, and the other provides the hardware necessary for instal-
lation of two units, side by side.
This Appendix provides step-by-step installation instructions for each option.
WARNING
Disconnect all the cables from the units, and then discon-
nect the units from power while performing the following
procedures.
Always observe standard safety precautions during instal-
lation, operation, and maintenance of this product.
No internal settings, adjustment, maintenance, and repairs
may be performed by either the operator or the user; such
activities may be performed only by a skilled technician
who is aware of the hazards involved.
DV-MUX3 Installation and Operation Manual C-1