Instruction manual

C-2. INSTALLATION OF SINGLE DV-MUX3 UNIT
The rack adapter kit includes one short bracket and one long bracket. The brackets are
fastened by means of screws to the two side walls of the case, as shown in figure C-1.
Figure C-1. Installation of Single DV-MUX3 Unit in 19" Rack
To prepare the unit for rack installation:
•
Attach the two brackets to the side walls of the unit. Each bracket is fastened
by means of two screws (with flat washers), which are inserted into the two
front holes on the side wall (nuts are already in place, on the inner side of the
wall).
•
After attaching the brackets, the unit is ready for installation in the 19" rack.
To install in the rack, fasten the brackets to the side rails of the 19" rack by
means of four screws (not included in the kit), two each side.
APPENDIX C - RACK INSTALLATION
C-2 DV-MUX3 Installation and Operation Manual